X-Series

X Series Heavy Duty

Grade 1 Cylindrical Lockset

X-Seriesul-listed2

  • ANSI : Meets & Exceeds ANSI – A156.2, Series 4000, Grade 1 Standards
  • UL Listings : UL Listed for “A” Label 3 Hour Fire Doors
  • ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
  • Lock Chassis : Steel, Zinc dichromated chassis for Corrosion Resistance
  • Clutching : Clutching levers standard for Vandal resistance on locking functions
  • Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
  • Lever Return : Anti-sag mechanism with independent lever return springs to prevent lever sag
  • Handing : Non-Handed – Completely reversible (S-A & S-B lever styles are handed)
  • Backset & Latchface : 2 3/4″ backset std. with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset is available with 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled edge doors
  • Latchbolt : Stainless Steel Latch bolt with 1/2″ projection, Deadlocking on keyed functions & exit latch
  • Cylinder Options : 6 Pin Brass Cylinder, C Kwy, with 2 Keys (standard), Prepared for Small format IC core (less core)
  • Optional Keyways : 11 popular competitor keyways available with replacement cylinders (extra charge applies)
  • Note: Replacement cylinders are supplied loose and not installed in locksets
  • Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
  • Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
  • Door Thickness : Factory Set for 1 3/4″ Door thickness – 1 3/8″ require shims, can be adjusted to fit up to 2″ thick
  • Lever Designs : Flat (standard, shown above), Curved, Half Curved, S-A & S-B
  • Standard Finishes :US3 PVD*, US4, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)
  • Marine Grade Option : Marine Grade 316 Stainless steel lever and rose cover upgrade available
  • Fasteners: Combination screws for wood or metal doors & frames
  • Warranty :Limited Lifetime Warranty
Specification Sheet
Functions List
Lever Style & Options
Installation For Standard Cylinder
Installation For Small Format IC core
Installation For Dummy Trim
X.234 – X Series Template 2 ¾” backset
X.238 – X Series Template 2 3/8″ backset
Warranty Information

Available Lever Styles

X Series Lever Styles & Options_r2_c2
Flat Lever Stocked in 6 Finishes
X Series Lever Styles & Options_r2_c7
Curved Lever Stocked in US26D
X Series Lever Styles & Options_r4_c4
Half Curved Lever Stocked in US26D
X Series Lever Styles & Options_r6_c3
5-A Lever Available with lever kits
X Series Lever Styles & Options_r7_c8
S-B Lever Available with Lever Kits