Grade 2 Cylindrical Lockset
- ANSI : Meets & Exceeds ANSI – A156.2, Series 4000, Grade 2 Standards
- UL Listings : UL Listed “A” Label 3 Hour Fire Doors
- ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
- Lock Chassis : Steel, Zinc dichromated for Corrosion Resistance
- Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
- Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag
- Handing : Non-Handed-Completely reversible
- Backset & Latchface : 2 3/4” backset std. with 1 1/8“ x 2 1/4” latchface, 2 3/8” backset is available with
- Latchbolt :
- 1” x 2 1/4” latchface both with self adjusting front for square or beveled edge doors Stainless Steel with 1/2“ projection, Deadlocking on keyed functions & exit latch
- Cylinder : 6 Pin Brass, C Kwy, with 2 Keys or Prepared for Small format IC core (less core)
- Strikes : 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available
- Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
- Optional Thru Bolts : Removable Thru Bolts – Can be installed without thru bolts
- Door Thickness : Factory Set for 1 3/4″ – can be adjusted to fit 1 3/8″ up to 2″ thick
- Standard Lever Design : Flat (standard – stocked in US26D and US10B)
- Other Lever Choices: Curved, Half Curved, S-A & S-B
- Standard Finish : US26D
- Special Order Finishes: US3 PVD*, US4, US15, US26 PVD* (PVD = Lifetime Finish)
- Fasteners : Combination screws for wood or metal doors & frames
- Warranty : Limited Lifetime Warranty
Specification Sheet
Functions
Lever Styles and Options
Installation Instructions
2 3’4 BS Template # J.234
Functions
Lever Styles and Options
Installation Instructions
2 3’4 BS Template # J.234
Standard Strike
ASA Strike Template – Metal Frame
ASA Strike Template – Wood Frame
Optional Strikes
Full Lip Strike .25 in rad Template Metal
Full Lip Strike .25 in rad Template Wood
T Strike Template MTL
T Strike Template WD
Warranty Information