The 1000 Series Exit Alarm Kit is a retrofit kit used to help prevent unauthorized use of an emergency exit door.
- Application: 1000 series rim & surface vertical rod exit devices, panic or fire rated
- Operation: Alarm is armed/disarmed by turning key in the mortise cylinder
- LED flashes green every 30 seconds to indicate alarm is in armed position
- Bypass: Alarm is activated when push bar is depressed
- Alarm can be bypassed by trim/key from the outside or by lifting rods manually on SVR device. For a higher level of control neither is recommended
- Battery: 9 Volt battery, life approximately 1 year – Low battery alert indicated by red flash & chirp every 5 seconds
- Decibel Rating: Approximately 90 decibels at 15 feet
- Part Numbers: ALK-1000 33″ for standard length devices & ALK-1000 42″ for long devices
- Included Parts: New Slide Cover with LED indicator, Alarm Board, Mounting Plate, Mortise Cylinder, Cylinder Collar, Back Plate, Cylinder Retaining Ring 9 Volt Battery, “Emergency Exit” Sticker for touchpad or door face
- Cylinders: 1 1/8″ Mortise Cylinder with std. cam (included) – 6 Pin Brass, C Kwy, with 2 Keys
- 1 3/8″ Mortise cylinder housing for 6 or 7 pin Small format IC core (less core)
- Optional Keyways: 11 Popular competitor keyways available with replacement cylinders
- Finishes: US3, US4 , US10B, US26, US32D
- Limited Lifetime Warranty