Z-Series

Z Series Extra Heavy Duty

Grade 1 Cylindrical Lockset

Z-Seriesul-listed2

  • ANSI: Meets & Exceeds ANSI – A156.2, Series 4000, Grade 1 Standards
  • UL: Listings: UL Listed for “A” Label 3 Hour Fire Doors
  • ADA Compliance: Meets ADA and ANSI A117.1 accessibility codes
  • Cycle Testing: Tested to over 2 Million Cycles
  • Lock Chassis: Steel, Zinc dichromated for Corrosion Resistance
  • Clutching: Clutching levers standard for Vandal Resistance on locking functions
  • Trim: 5″ Solid zinc diecast levers, 3 1/2″ wrought brass roses
  • Lever Return:Independent lever return springs to prevent lever sag
  • Handing: Non-Handed – Completely reversible
  • Standard Latch: 2 3/4” backset with 1 1/8“ x 2 1/4” latchface – Stainless steel latchbolt with 3/4“ projection,
  • Optional Latches:
    • 2 3/4” backset with 1 1/8“ x 2 1/4” latchface – Stainless steel latch w/ 1/2“ projection
    • 2 3/8” backset with 1” x 2 1/4” latchface – Stainless steel latch w/ 1/2” projection
  • Cylinder Options: 6 Pin Brass, C Kwy, with 2 Keys std,  Prepared for Small format IC core (less core)
  • Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
  • Door Preparation: ANSI A115.2 – 2 1/8″ crossbore with (2) 5/16″ Thru bolt holes
  • Door thickness: Factory Set for 1 3/4″ – can be adjusted to fit 1 3/8″ to 2″ thick doors
  • Lever Designs: Flat (standard, shown above), Curved & Half Curved
  • Standard Finishes: US26D in stock
  • Special Order Finishes: US3 PVD*, US4, US10B, US15, US26 PVD* (PVD = Lifetime Finish)(2 week lead time)
  • Lead Lining Option: 1/32” lead lined rose & 1/32” lead wrapped latchbolt (requires 1” bore)
  • Electrified Options: 12 or 24 Volt (AC/DC) Fail Safe (Electrically Locked), Fail Secure (Electrically Unlocked)
  • REX – Request to exit switch, See electrified section
  • Limited Lifetime Warranty